Skip to content
Shake/Tilt Switch Module SW-200D
Product Overview
This module is great for detecting basic orientation and motion. There is a built in pull-down resistor and a status LED for easy incorporation into your projects. To use, simply connect 3.3V-12V to the 5V pin, GND to the GND pin, and a digital or analog I/O pin from your microcontroller to S.
When the module is tilted to the right, the LED will glow and the S pin will be shorted to VCC (5V pin). When the module is tilted the other way, the S pin will stay pulled down to GND. Note that this tilt switch module should only be used with low current logic signals (about 20mA), and not with high power switching.
Product Features
- 10° sensitivity range
- Status LED
- 12V, ~20mA Max
- 2 mounting holes
Product Dimensions: 19.6mm x 15mm x 5.8mm / 0.77″ x 0.59″ x 0.23″
Approximate Weight: 1.4g / 0.05oz
Documentation
Accessories
These accessories are hand picked by our team to be compatible or very relevant to this product.
Jumper Wires Male/Female 20 150mm (6″)
$0.95Out of stockJumper Wires Female/Female 20 150mm (6″)
$0.9516 in stockTilt/Shake Ball Switch SW-200D
$0.654 in stock
Related products
Limit Switch Module (Normally Open)
$3.509 in stockSensor Module Cable 20cm
$0.7510 in stockTilt/Shake Ball Switch SW-200D
$0.654 in stock
0 reviews for Shake/Tilt Switch Module SW-200D
There are no reviews yet. Only logged in customers who have purchased this product may leave a review. Log in